.::: FIVALCO :::.


	Specification Download
Swing Check Valve with Lever & Weight/Spring PN16/ PN25/Class125/Class250	Fig. 5108-Bronze Disc Trim. Fig. 5110-Rubber Disc Trim.

Valve Standards

Complies with EN 12334, BS 5153, MSS SP-71 /AWWA C508.

Working Pressure and Temperature

Size 50 to 600, working pressure PN16/Class125.
Size 50 to 300, working pressure PN25/Class250.
Temperature from -10℃ to 120℃ for bronze or
EPDM disc trim.
Temperature from -10℃ to 82℃ for NBR disc trim.

Flange Types

EN1092-2 PN10/PN16/PN25, ANSI B16.1 Class125,
ANSI B16.2 Class250, BS10 Table D/E, JIS 10K/16K.

Materials Specifications

Part Name	Materials	EN Spec.	ASTM Spec.
Body*	Cast Iron	EN-JL1040	A126 Class B
Cover*	Cast Iron	EN-JL1040	A126 Class B
Side Plug	Brass	CuZn39Pb3	B16 C36000
Hanger Pin	Stainless Steel	BS970 304S15	AISI 304
Hanger	Ductile Iron	EN-JS1050	A536 65-45-12
Disc*	Cast Iron	EN-JL1040	A126 Class B
Disc Trim	Bronze	EN1982 CC491K	B62 C83600
Disc Trim	EPDM/NBR	Commercial	Commercial
Body Trim	Bronze	EN1982 CC491K	B62 C83600
Gasket	Graphite	Non-asbestos	Non-asbestos
Lever	Carbon Steel	BS970 050A20	AISI 1020
Weight	Cast Iron	EN-JL1040	A126 Class B
Spring	Carbon Steel	Spring Steel	Spring Steel

Note*: Body, cover & disc materials are ductile iron when valve pressure rating is PN25 or Class250.

Dimensions (mm)

Size	50/2"	65/2.5"	80/3"	100/4"	125/5"	150/6"	200/8"	250/10"	300/12"	350/14"	400/16"	450/18"	500/20"	600/24"
A	203	216	241	292	330	356	495	622	699	787	914	914	1016	1219
B	121	135	141	168	182	215	267	305	343	450	520	550	590	680